Wafer and Lug K35 / K36 / K37 / K38 - Valve Data
K35/36/37/38 product is high performance valve with double offset application to make flow
control easier.
Double Offset Disc /Stem :
- Unique two-piece stem and double-offset design allows for high cycling and creates a lower disc profile with increased capacity and a rangeability of 33:1.
- In addition to increasing flow area across the disc, design minimizes wear points between seat-disc.
The first offset is achieved by locating the streams downstream of the center-line of the seat which allows 360 deg. Sealing surface.
- The second offset is achieved by off-center of the vertical axis of the seat.
- The combination of these two offsets creates a camming effect as the disc swings into and out of seat. No wear points between disc and seat.
Features and Benefits :
- Extended neck allows two inches of pipeline insulation.
- Integrally casted mounting flange provides direct mounting of many actuators.
- Disc taper pin are designed to position half in disc and half in stem to eliminate potential failure by placing compression instead of shear.
- Integrally casted disc stopper in body perfectly locates the disc in seat to achieve maximum life of seat and other relevant parts.
- Bore with stem bearing provides max. stem support.
- Gland bridge components for uneven adjustment of gland nuts.
- To make flange face uninterrupted, retainer ring is provided with spiral wound gaskets which provides unidirectional dead-end service as standard.
- Seats are providing bi-directional, drop tight closure in vacuum and throughout all pressure ranges as well full rated differential pressure. Variety of material allows optimum seat life in all applications.
Applications and Special services :
The single piece through shaft design is a reliable solution for difficult conditions in the following applications:
- Sour gas
- Food processing
- Military
- Pharma
- Vacuum and Oxygen
- Steam
- On/off Control
- Dead-end service
- Chlorine
- Ammonia
- Reverse osmosis
- Slurry
- Modulating
- “M” type fluids
- Flow control
Two-Piece stem vs One-Piece stem :
- Disc geometry maximizes flow capacity by increasing the available flow area through the valve. This increase in disc efficiency results in a higher valve Cv.
Suitable Standards and Specifications :
- ANSI B16.34 / B31.1 / B31.3 / B16.5
- API 598 / BS 5146 / BS 4504 / DIN 3230 / JIS 2215
- ISO 5752 / ISO 2084
- MSS SP 6 / SP 25 / SP 55 / SP 61 / SP 67 / SP 68
Product details :
- K35 : ANSI Class 150, Wafer type
- K36 : ANSI Class 150, Lug type
- K37 : ANSI Class 300, Wafer type
- K38 : ANSI Class 300, Lug type
Common Standard Trims - General Purpose
Body |
Disc |
Shaft |
Seat |
Packing |
Cast Steel |
Stainless Steel |
17-4 PH SS |
RTFE |
PTFE |
Stainless Steel |
Stainless Steel |
17-4 PH SS |
RTFE |
PTFE |
Cast Steel |
Stainless Steel / ENP |
17-4 PH SS |
UHMWPE / Polyester |
PTFE |
Stainless Steel |
Stainless Steel / ENP |
17-4 PH SS |
UHMWPE / Polyester |
PTFE |
Metal Seated High temperature Purpose
Cast Steel |
Stainless Steel / ENP |
17-4 PH SS |
RTFE / SS / Chrome plated |
PTFE |
Stainless Steel |
Stainless Steel / ENP |
17-4 PH SS |
RTFE / SS / Chrome plated |
Graphite |
Corrosion Resistant Trims
Cast Steel |
Stainless Steel |
SS 316 - Cond. B/ Nitronic 50 |
RTFE / Polyester |
PTFE |
Stainless Steel |
Stainless Steel / ENP |
SS 316 - Cond. B/ Nitronic 50 |
SS 316 Chrome plated |
PTFE |
Fire Safe Trims
Cast Steel |
Stainless Steel / ENP |
17-4 PH SS |
SS 316 Chrome plated & RTFE |
Graphite |
Stainless Steel |
Stainless Steel / ENP |
17-4 PH SS |
SS 316 Chrome plated & RTFE |
Graphite |
Cv values and Travel Position
SIZE In mm |
Angle of Openiing - Deg. |
CL 150 |
CL 300 |
|
10 |
20 |
30 |
40 |
50 |
60 |
70 |
80 |
90 |
90 |
50 |
6 |
10 |
19 |
34 |
51 |
78 |
105 |
134 |
163 |
160 |
65 |
6 |
10 |
19 |
34 |
53 |
80 |
111 |
148 |
175 |
170 |
80 |
8 |
12 |
24 |
43 |
67 |
100 |
139 |
186 |
220 |
215 |
100 |
16 |
23 |
44 |
80 |
130 |
194 |
269 |
360 |
425 |
413 |
125 |
30 |
44 |
83 |
149 |
242 |
366 |
504 |
673 |
795 |
785 |
150 |
50 |
70 |
130 |
230 |
370 |
550 |
760 |
1010 |
1195 |
1140 |
200 |
83 |
117 |
251 |
437 |
695 |
1052 |
1496 |
2001 |
2440 |
2300 |
250 |
144 |
202 |
454 |
754 |
1185 |
1821 |
2611 |
3541 |
4540 |
4333 |
300 |
208 |
304 |
678 |
1051 |
1625 |
2766 |
3838 |
5325 |
6915 |
6600 |
350 |
257 |
360 |
747 |
1186 |
1909 |
3121 |
4416 |
6225 |
8300 |
7920 |
400 |
308 |
432 |
803 |
1422 |
2289 |
3614 |
5251 |
7530 |
10040 |
9580 |
450 |
373 |
548 |
1121 |
1869 |
2990 |
4735 |
6728 |
9845 |
12460 |
11890 |
500 |
463 |
680 |
1390 |
2315 |
4010 |
6175 |
8795 |
12655 |
15430 |
14720 |
600 |
650 |
991 |
2076 |
3803 |
6060 |
9091 |
13301 |
18466 |
21660 |
20665 |
750 |
1015 |
1550 |
3240 |
4670 |
9460 |
14200 |
21400 |
29800 |
36000 |
35500 |
- Operator: Manual, Gear, Pneumatic, Gear With Electric / Pneumatic